This cam action fixture clamp provides positive down force while using very little space on a fixture. Work pieces can be clamped in series by using the back surface of a clamp to locate the next work piece.
The hardened steel clamping element has both a smooth surface for machined work pieces and a serrated clamping surface for rougher work. The height of the clamp can be adjusted by milling the slot deeper in the fixture plate.
Metric
| Part No. | A | B | C | D | E† | F | G | H | I* | Cam Screw |
Total Distance of Movement |
Mounting Screws (Included) |
Torque (N.m.) |
Holding Force (N.) |
Repl. Cam Screw |
Repl. Square Washer |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 54110 | 43.2 | 19.0 | 12.7 | 25.4 | 2.3 | 19.0 | 6.4 | 15.75 | 21.5 | 50368 | 1.6 | M8x16 LHCS | 28.20 | 8900 | 50368 | 21006 | |
| 54112 | 54.0 | 25.4 | 11.4 | 33.5 | 2.8 | 25.4 | 9.7 | 15.75 | 24.4 | 50372 | 2.0 | M10x20 LHCS | 88.13 | 17800 | 50372 | 51016 | |
| 54116 | 75.0 | 38.1 | 25.2 | 50.8 | 3.3 | 38.1 | 12.7 | 31.75 | 43.2 | 50374 | 2.5 | M12x30 SHCS | 135.58 | 26700 | 50374 | 21026 |
E† is the distance needed between the front of the clamp base and the work piece.
I* The distance from the top of the washer to the bottom of the clamp body.
Drill and tap the centerline of “B” for mounting holes.
I* The distance from the top of the washer to the bottom of the clamp body.
Drill and tap the centerline of “B” for mounting holes.
